| Customization: | Available |
|---|---|
| After-sales Service: | 3 Month |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
T6-101 Core drilling tools T6-101 Core lifter and core lifter case
Double Tube Core Barrels
|
---TT Series Core Barrel Ultra-thin walled double tube core barrels, available diameters 46 and 56 mm. Very thin cutting face allows very rapid rate of penetration through hard formations. They are suitable for underground mining applications. |
|
---T2 Series Double Tube Core Barrels The T2 Series are thin wall double tube core barrel, used for surface exploration, especially mining applications. Due to their thin kerf, these core barrels provide rapid penetration. Available in diameters 46, 56, 66, 76, 86, 101mm. |
|
---T6 Series Double Tube Core Barrels These are a continuation of the T2 series, but of a sturdier design and available in larger diameters, 76, 86, 101, 116. 131 and 146mm. They are applied in surface mining and geotechnical drilling. |
|
---LTK 48 & LTK 60 Double Tube Core Barrels The LTK series core barrels system is a thinner wall core barrel than T2 series. They offer a cost effective, high production, which is designed for optimum production and core recovery in medium to extra hard rock formations. Available sizes 48 and 60mm. |
|
---WF Series Double Tube Core Barrels They are geotechnical core barrels primarily designed for coring relatively soft formations in using face-discharge bits. Simple construction and more resilient to damage than thin-wall barrels,but with slower enetration rate. |
|
---WG Series Double Tube Core Barrels There are Double tube core barrels for WG series. Available in DCDMA sizes E, A, B, N, and H. |
|
---TBW and TNW Core Barrels The thin kerf area allows rapid penetration. |
|
---Wireline Double Tube Core Barrels Wireline double core barrels are primarily used in deep coring. With an overshot device, they eliminate the need to couple and uncouple the rod string each time the core is retrieved. Available in DCDMA sizes A, B, N, H ,and P. |
|
---Chinese Standard Double Tube Core Barrels |
|
---Chinese Standard Wireline Double Tube Core Barrels |
|
---Jet-type Reverse Circulation Double Tube Core Barrels |
Triple Tube Core Barrels
|
---MLC (Triefus) Series Core Barrels These triple tube core barrels are generally used for geotechnical purpose, designed to maximize core recovery in soft formations. Available diameter sizes from 35-146mm. |
|
---Wireline Triple Tube Core Barrels Wireline triple tube core barrels are generally required in broken, fractured formations. They incorporate a third, split inner tube on base of wireline double tube core barrel. This can be pumped out of the inner tube after retrieval, allowing the core to be examined in its in-situ state. |
More pictures:
Our Company pas atention to produce quality and abides to credit, and also does the best to provide the quality produdcts and excellent service to customer. To build good after-sale service system, we draw up the Quality Guarantee according to the industrial standards combining field experience.
| Diamond Drill Bits |
1. Size, and / or technical parameters(matrix etc.) are different from the requirements of clients' purchase order.
|
Replace |
|
2. Thread can not fit clients' barrel.
|
Repair or replace | |
|
3. Break down a piece from matrix, and the volume of the piece exceed 2mm*2mm*2mm, and such break is not caused by drilling.
|
Replace |
|
|
4. Matrix falling not caused by drilling.
|
Replace or return | |
|
5. Groove on matrix caused by manufacturer.
|
Replace or return |
|
|
6. Drilling speed is obvious slower than congener products caused by manufacturer.
|
Raplace,and each item quantity does not exceed 3pieces. | |
|
7. Bit life is obvious short caused by manufacturer.
|
||
|
8. Breaking down of matrix, falling matrix, groove and short bit life caused by operating reasons-drill rod sticking, premature failure of the bit crown and hole-bottom not to be cleaned.
|
Be excluded from Qulity Guarantee | |
|
9. Short bit life or no penetration caused by drilling machine, drilling techniques or parameters.
|
||
|
10. Properly worn and the matrix is finished.
|
||
|
11. Thread damaged or distorted due to improper operation.
|
||
|
12. Steel body cracked in drill.
|
Replace or return |
|
| Reaming shell |
1. Thread is not correct.
|
Replace or return. |
|
2. Steel body creacked in drill.
|
||
|
3. PCD Strips falling.
|
){kind=link}